Installing Combo Wall on a wall

Watch a short installation video and see how to mount Combo Wall step by step

Step-by-step instructions

What you will need:
1. Combo Wall set
2. Spider Glue Total Crystal (or another strong mounting adhesive)
3. Caulking gun
4. Measuring tape or level
5. Pencil for marking
6. Cloth to clean the wall
Step 1. Preparing the wall
Make sure the surface where you will mount the tiles is clean, dry, and even. Remove dust, grease, and any loose plaster.
Step 2. Marking the installation area
Measure and mark the position where you want to start mounting the tiles. This will help you avoid misalignment and achieve a clean final look.
Step 3. Preparing the adhesive
Prepare Spider Glue Total Crystal (or another adhesive with similar strength) and a caulking gun for application. Make sure the glue has the right consistency and is suitable for indoor use.
Step 4. Applying the adhesive
Apply adhesive along all four edges of the tile, then add a few lines in the center in a grid pattern.
This ensures even bonding of the tile to the wall.
Step 5. Mounting the tiles
Press the tile onto the wall and gently tap it with your hand to spread the adhesive evenly underneath.
Step 6. Connecting the tiles
To keep the tiles aligned and stable, connect them using mounting pins. They help maintain perfect spacing and straight lines.
Step 7. Drying time
Leave the tiles for 24 hours to allow the adhesive to fully cure.
After this time, the wall is ready!

Get inspired.

We’ve also prepared inspiration cards with picture ideas that children can build.